MusicNomad · Truss rod wrenches
MusicNomad MN238 Heel Nut Truss Rod Wrench
When to choose it
Choose this wrench when the guitar’s adjuster is a compatible slotted heel nut. Compare the two approach angles with the clearance at the neck heel, where a headstock wrench may not reach the hardware correctly.
The listing says the pickguard must be removed for the intended access method. Verify that procedure for the exact guitar and stop if the driver cannot sit squarely in the slot.
Specifications
- Brand
- MusicNomad
- Measurement or fit
- Slotted heel nut at 45 or 90 degrees
- Setup task
- Reach a slotted heel adjuster
- Drive
- Slotted heel nut
- End angles
- 45 and 90 degrees
- Access note
- Pickguard removal per maker
- Model
- MN238
- Amazon.com reference
- B0H8WL7MRD
Care and other choices
Questions about this product
Is it intended for a hex nut at the headstock?
It has slotted ends for supported heel nuts. Check the appropriate drive for a headstock adjustment.
Can I choose by a Fender model name alone?
Check the exact instrument's adjuster shape and position. A model family can have several versions.
Why are the ends angled differently?
The two angles give separate approaches to the slot where the work area has limited clearance.
